Heat-Easy Portable Heater
Our brand new Heat-Easy heater. Light, small, powerful, odorless, silent and robust, the Heat-Easy meets all expectations!
Ideal for heating a small cabin, a construction trailer, a forest cabin, a roof tent or even a basement. The possibilities of use are endless!
Weatherproof, it will heat your space without difficulty, even in very bad weather.
Enjoy 50 hours of heating autonomy. Heat up to 30°C at -10°C.
Thanks to its double silencers and its extra silent pump, one of the advantages of the Heat-Easy is that it emits very little noise, 25dB at 1 meter, enough to hear a pin drop!
It is also supplied with a 3m* hose completely insulated against noise and heat**.
Configure your Heat-Easy heater now and don't hesitate to get in touch if you have any questions.
* several lengths available max. 5m on request, length of 3m supplied d'office.
** optional duct insulation
Use in ventilated areas only.
TECHNICAL DETAILS
- heating Autotherm 2D power up to 2kW*
- control panel: Standard PU-5, Deluxe PU-27 or Comfort Control
- altitude kit** up to 4000m
- exhaust silencer; option: double silencer
- 5L diesel tank
- extra quiet pump
- ventilation
- yellow storage box (everything is integrated into this one)
- rubber feet
- 3 meter power cable with cigarette lighter plug and quick plug
- 3 meter control cable with quick plug
- hose 3 meters with quick coupling; option: thermal and sound insulation
- waterproof, resistant to rain and cold down to -40°C
- heat output: 1.0 to 2.0 kW
- fuel consumption: 0.1 to 0.24 l/h
- power consumption, 10 to 29W
- heated air volume, 34 to 75m3/h
- fuel type Diesel / Gasoil (GOST 305)
- operating voltage, 12V, 24V or 230V (option)
- dimensions 495 x 365 x 315 mm
- mass 12Kg
- case made of impact-resistant polypropylene (PP)
*The heating power is adjustable from 0.8 to 1.8 kW and the volume of heated air can reach 75 m3 per hour. The fuel consumption in operation is very economical and consumes between 0.1l and 0.24l of diesel per hour, which allows a maximum autonomy of 50h.
**This heater is equipped with an altitude kit. cc781905-5cde-3194-bb3b-136bad5cf58d_ This means that the heater automatically reduces the amount of diesel injected depending on the pressure of the ambient air, so that when the oxygen content of the air decreases, clogging of the combustion chamber can be avoided or significantly reduced. The heater has been successfully tested up 'at an altitude of 4000m.PU-5 Standard Control:
To heat your cabin, you only have access to mode suite :
- Power mode: PU-5 (hot air blowing more or less)
Control panel with single button, this model does not allow temperature regulation unlike the PU-27 (4725) which has an integrated sensor. The PU-5 makes the heater blow more or less by turning the knob, but the heater never stops. Not having a digital display, any fault codes are made by counting the number of flashes of the LED.PU-27 Deluxe Control:
In thermostat mode with the PU-27, the heating never switches off when it reaches temperature (the ventilation always runs).
Thermostatic control panel with programmable clock. Very simple and intuitive use, a single button to push to turn the Autoterm heating on or off, it allows, unlike the PU-5 (3765), to set the desired temperature in the passenger compartment.To heat your room, you have the choice between the following modes:
- Power mode : more or less strong
- Temperature mode: you can choose the desired temperature thanks to its integrated thermostat (difference of + or - 3°C, the new command_cc781905-5cde-3194-bb3b- 136bad5cf58d_Comfort Control is more accurate)
Comfort Control command:
The new "comfort control" control panel will help you control your Autoterm heating more easily.
- User interface intuitive
- Status display par LED
- Function thermostat improved*
- Heater options additional
- Quick access button for heating
- Function of security of vehicle battery
- Maintenance reminder heating
- Built-in digital temperature sensor accurate
- Language French (FR/EN/NL)
- Complete stop of ventilation once the requested temperature has been reached
- Access to settings, timer and heating modes even during operation
- Possibility to operate the heating for a chosen duration (eg: 3h)
